Large inclined conveyor belt is a common type of conveyor belt. Compared with other common conveyor belt, large inclined conveyor belt has many advantages. Generally speaking, conveyor belts with large inclination are divided into two categories according to the inclination of conveying angle: one is with partition and the other is without partition. In order to convey materials with large inclination, conveyor belts with large inclination are now generally referred to as conveyor belts with partition. Baoding Jingbo Rubber Co., Ltd. is here to give you a brief introduction to the large inclined conveyor belt.

Composition of conveyor belt with large inclination angle: base belt, partition board and side shield. The function of the barrier is to prevent material from spilling during transportation, and the partition can support material. In order to realize material conveying at large inclination angle, the partition of the conveyor belt made by Jingbo Rubber Co., Ltd. adopts T-type and TC-type. The second vulcanization method is used for both the barrier and the transverse partition, which makes the connection with the base belt very high.

Advantages of large inclined conveyor belts (ordinary large inclined conveyor belts):

1. Large conveying capacity and large conveying angle (conveying angle can reach 30-90 degrees).

2. Small area and less investment.

3. There is no limitation in conveying materials, which can convey easily scattered materials, such

as powdery, pasty and small granular materials.

4. Long service life, low consumption and high belt strength.